Fashion is a very non-permanent and capricious thing and, where you do not give, everywhere you need to fit. Each successful and keeping up with the times a person wants to look stylish and fit the latest fashion trends.
Over the past few years, the popularity of leather accessories and in this article are gaining popularity and in this article we will tell about how to make stylish skin ornaments.
The manufacture of leather ornamental products has long been engaged not only by craftswomen and needlewomen, but also the world famous designers and fashion houses.
Leather products are perfectly combined with any style of clothing, like with everyday, that to and with the evening.
So, let's talk about how to make leather decoration.
Handmade accessories are still considered unique and original. It is not difficult to make the decoration from the skin with your own hands, it is enough to have only the initial skills of needlework. To work, you will need trimming skin of different shades, beads and rhinestones for the decor and, possibly, pieces of fur.
Necklace of leather
The necklace performed itself will complement any image and will become an excellent gift for a close man. With the manufacture of such an accessory, even a beginner needlewoman will cope.
For work it is necessary to prepare:
- Skin pieces.
- Durable glue.
- Water resistant paints.
- Beads for decor.
First of all, it is necessary to make a pattern. To do this, draw three flower of different sizes on a sheet of cardboard, cut them out and transfer them to the skin. In the same way, draw leaves for our flower necklace.
In order to assemble the flower, glue the billet from the skin in order of reduction, and the center of the flower decorate the bead. In this way, prepare three flower of different sizes.
Behind the blanks you need to stick the leather loop, and drive flowers on a chain or lace. Necklace is ready.
Skin jewelry are relevant than ever, and the product of own production will emphasize your individuality and style.
For horns of leather, you will need:
- Skin pieces.
- Clasp (you can buy in specialized stores for creativity).
- Thick needle.
First we make a pattern on cardboard and carry it on a piece of leather. The form of the earrings can be any: oval, rectangular, in the form of a rhombus or heart. We will make earrings in the form of leaves.
Thick needle gently do the hole in the upper corner of the sheet. With the assistance of the passage, we hold up the ring on the fastener, we put on it the petal and bend into its original position.
Using scissors make a sheet of cuts on the sides. If you wish, you can draw a pattern or ornament with acrylic paints on the leather part.
Brooch leather and fur
Such material as the skin is perfectly combined with fur. We present the master class for the manufacture of leather-furred brooch.
Materials for work:
- Leather and fur.
- Needle with thread.
- Beads and rhinestones.
On a cardboard sheet, draw a template in the form of three flowers, different in size. We carry the pattern on the skin and take out gently. Bonding flowers in descending order. In the center of the flower is both a bead.
Next came the furs turn. The combination of different textures of materials looks very rich and luxurious. Using fur of different colors, you can cut the leaves for a flower or come up with your original decor. After the end of the work, attach the pin from the wrong side of the product and your brooch is ready.
If you have no trimming of the skin of the required size and color at hand, then using a dense tissue and a special paint, you can make a decoration under the skin, which will not differ from the present material.
Summing up Note that there are currently many materials and ideas for creativity, for the manufacture of jewelry and accessories.
It is not necessary to spend big money on chains, necklace and earrings. It is enough just to connect the imagination and fantasy and create from undergraduate materials.
In addition, it is not only a fairly budget option, but also a way to get a multitude of decorations for any mood and outfit. Dream, invent, create and you will always be in the spotlight.
Photo of leather jewelry
We also recommend viewing:
The skin is a very plastic material from which you can create a lot of wonderful things. Many have houses old leather jackets, bags, trousers, etc., who were isolated, came out of fashion. And it seems to be worn, and throw out sorry. Amazing jewelry from the skin can be released from such things.
For beginners, the simplest options are suitable, which will allow you to adapt to the material and tools.
For example, here is such a bracelet. For him will be needed:
- Cut off the skin, preferably clean, without failures;
- glue for the skin;
- scissors, better tailor;
- a thread;
- Shilo, acute needles. You can even hole punch.
We measure wrist girth. Cut out the strip of the skin of the corresponding length and 2,5-3 cm width.
For convenience, fold in half and cut the workpiece into three parts along, not reaching the edges of the centimeter two.
One end is missing alternately between the first and second stripes, and the second, and the third. Thus, the brazed pigtail.
Then we curl the end of the bracelet and make a hole on each. We produce thin skin striped through them. The bracelet is ready, it can be tied on a bow, and you can cut the mount from the same skin, as shown in the photo below.
But such a simple necklace in the style of boho will decorate a concise image.
The next master class will demonstrate how, frying the skin in a pan, you can make a beautiful flower, which will look good as a brooch, pendant, ring and earrings.
Required material and tools:
- skin cuts;
- PVA glue;
- hot glue pistol;
- acrylic paints;
- paper for creating patterns;
- Pen or pencil.
Draw on paper Flowers of different sizes and cut out the amount of blanks, as indicated in the photo. You will also need leaves and folded twice strips chopped with fringe.
Having put on the frying pan on the middle fire, spread the front-side billets on them. After some time, they will start climbing, becoming more rounded, then press the camp of the knife. After the details begin to shrink, remove them from the frying pan.
On the billets of the leaves with a hot knife we denote the accommodation.
We form the desired flowers.
Then, if you wish, stain the obtained parts preferably with a sponge, since the tassel will leave the divorce. It will be more interesting if you use the main background gold paint, bronze, and the sheet is toned a little green.
If we want to make a bracelet, then we take the basis of it ready for it, from the store made of undergraduate materials, for example, a bobbin from the tape, a strip of dense cardboard. It will need to cover the skin, gluing the glue.
Then we collect all the details together, or with a thread with a needle, either glue.
And so it looks like a set of bracelet, rings and earrings:
Also, the method of heat treatment, but without a frying pan, you can create such a magnificent chrysant.
A stupid knitting needle is suitable as a heating tool, an unwitting side of a knife and a candle.
Cut the details as in the photo. Moreover, the upper strip should be, first thin and without teeth. Its width is approximately 3 cm, and the length is about 30 cm. Triangles should turn out three sizes, slightly less than each other.
We curl the tips of the teeth. You can make them and triangular.
Skin can be toned in the desired color. On leaflers go back and green.
Now proceed to heating. We take a heated needle and spend along each teeth, pulling it. Thus, we obtain the rolled partially tube. On leaves make a streak.
Build a flower. On the basis of the base, first stick large petals, then medium and small, filling everything to the center. Then twisted the strip with the tooth, on some turns can be lined. And fix the resulting core to the center.
On the opposite direction we join the leaves. And if you want to make a brooch, then the corresponding mount.
Such skin can be additionally painted and cut into a fringe, and then create the following ethnic earrings.
Again, it is better to use acrylic paints for painting, they will quickly dry.
Another option of such earrings:
By adding beads, rhinestones, rivets, shared shoelaces, etc., you can create the following decorations.
You can even cut the inscriptions on the front side of the strip.
The skin itself can become a kind of bead. Cutting two rectangles of different sizes, for example 5 and 4 cm. Collect it into the harmonica, having driven to the thread. At the same time it is necessary to fix nodes from two sides.
Alternate leather element with beads of different sizes and material.
Install the mount on the ends and it turns out either necklace or bracelet.
This article provides only a few techniques and options for decorations. However, they will allow creating a variety of jewelry, which will give some ethnicity to any image. Decorations look noble and expensive. Undoubtedly, they will become a wonderful replenishment of not only your collection, but also as a gift will delight loved ones and acquaintances.
Video on the topic
Incredible universal material from which you can do real masterpieces - leather! After all, it really is: it is easy to find, it is well amenable to coloring, cutting and gluing ...
It does not matter where you will take it - with a coat, worn boots, bags, and so on. This is not a special difference, the main thing is that it is still in good condition. So, in today's article, we will talk about jewelry from fur and skin with your own hands.
Brief content of the article:
How to make a leather bracelet?
Make a leather bracelet with your own hands quite easily. To make it you need to find stripes made of genuine leather. The easiest way is to braid an ordinary pigtail of three tapes and tie, wrapped around the wrist a couple of times.
Another way. We take a wide strip of the skin and stick on it all that you want: a pair of stones, beads, sequins ... It already depends on your imagination. At the edges, the strips do holes and insert a ribbon there. Refine the wrist decoration is ready.
If such bracelets do not like you, then on the Internet you can find many more varieties of the most diverse photos of leather jewelry.
Leather belt do it yourself
Of course, in the store you can buy a beautiful leather belt, but you have to pay a prey. So why not make it with your own hands?
To make the belt you will need a certain number of identical billets. To do this, you can use the stencil.
Where to take it or how to do it? Everything is simple. You need to take a leaf into a cage and draw a bowl with a height of 10 cm, the edges determine 6 cm, and in the center leave 2 cm.
Next, you need to smooth the corners, retreat from the edge and the center one centimeter and draw a small triangle. Do holes and cut ready template. In order to be more convenient, you can transfer it to cardboard.
After you have made workpieces, you can start an assembly of decoration. Fold a bow in half. Insert the next item in the central hole and fold again. And continue this procedure until the belt length becomes the most appropriate.
At the edges of the finished product, it is possible to attach leather ties or purchased in fasteners. Belt ready!
This is the perfect choice for a female, and this product also applies to male leather decorations.
True beauty from leather with their own hands
In addition to simple products from this material, you can make real leather jewelry for solemn events. For example, a necklace on the neck, an attractive pendant or beads. To make a beautiful pendant you need leather shoelaces, pieces of skin of different colors, scissors, glue and small pebbles.
At the beginning you need to prepare the basis for which everything will be fixed in the future. It can be any form. Behind the base from above you need to stick or sew the loop for the rope. Using hot glue, attach beads to it.
After that, the colored lace is smeared with glue. There are stones and beads on it, and in the center - fur. The foundation was made. Next you need to make the core.
Flowers are best made from multicolored soft skin. Cut five circles that are petals of the future decoration. To make volumes need to be heated. You can use matches. You need to take petals and keep the bottom side over fire.
The skin itself does not burn, but its lower part, heating, and creates the volume you need. When the item is ready, this procedure is repeated with the remaining petals.
It will look very beautiful if there are beautiful pebbles in the core of the flower. Near him of petals and a flower is created. From the skin of another color, you can cut green leaves and glue. Pendant is ready!
A variety of leather jewelry personally
As we have already spoken, you can make a huge number of a wide variety of products with your own hands. We will offer some more product options. For example, from old skin you can make a beautiful broach. Also make a peculiar leather bow and hairpin.
In addition, a casket for jewelry of leather is very beautifully defined. It is not difficult to make it, but to serve you for many years. There are different ways to make it, find which is very easy on the Internet.
So, we hope that now you understand how to make the decoration of the skin with your own hands. It is unusual and quite beautiful. In addition, they will be superbly looked with all the outfits. Be beautiful!
Photo of leather jewelry
We also recommend viewing:
Interesting material for the manufacture of luxury jewelry is the skin. There are both light products and complex, requiring experience and accuracy from needlewomen. Applying a little fantasy, following the advice of specialists, you can create unique masterpieces, beautiful decorations of leather with a decor, which will not be analogs.
For the product you will need:
- a piece of soft skin (rectangle);
Master class with a description for beginners:
- A smooth piece of soft leather is preferably red or brown, you need to fix on the smooth surface of the scotch.
- From the center we make cuts along the strip of the skin, not reaching the edges at the same distance.
- Our workpiece tie the usual node (not tight).
- Secure the fastener, now the bracelet is ready.
Youth bracelet with rhinestones
You can create a more complex youth bracelet model with beads or rhinestones.
It is necessary for the product:
- long strips of color leather;
- tissue x / b;
- clamping forceps;
- Different decor;
Detailed instructions, how to make a decoration:
- Cut out fine smooth leather stripes, with an insole, you need to put the tissue bands x / b for strength. This is the basis for the bracelet.
- Now you can start decoking the product to your taste. Select beautiful large beads (rhinestones, etc.), fix glue on the skin. If you choose beads, you need to sew it to the skin strip.
- Fasten the fastener.
Another option will be if on a thick rigid skin to periodically pierce a selection of 2 holes at some distance so that they will turn dense threads with 3-5 colored beads. It can be a bracelet or belt.
These are the most complex decorations, so some skill and needlework experience is needed. You can create ethno decorations: bracelets, pendants, earrings, hair gum, etc.
- Easily absorbs moisture genuine leather, it can be checked with a wet finger.
- The smell of skin is sharply different from the leatherette, it is heavier the substitute.
- Real skin never lights up from ordinary matches. But fake will be unpleasant and will be unpleasant.
It will take for work:
- Pieces of soft skin, better color (thickness up to 1 mm);
- joinery glue PVA "moment";
- Metallic sewer;
- soft rag;
- Smooth plastic (plexiglass) for smooth surface.
Phased skin decorations:
Long leather strips twist in tight harnesses. Stripe to apply the glue "moment" near the cut, it is convenient to distribute seer. Collapse the strip of about 0.5 cm, then you need to press the soft rapid so that it is better glued. Excess the amount of glue remove. So sell the whole length, ready to trim the harness.
Repeat the stage of the stage several times, receiving the necessary number of flavors.
Wrap the harness (s) in the "snail" (minimize in a small circle), in the center of dripping glue. Then the workpiece is tightly pressing to the surface, wait, when our glue grabbing.
We continue to twist on the surface of plastic. First we make the adhesive strip around our billet. When turns the harness, you need to capture all glue with a cut, as shown in the diagram. So immediately the skin will be fixed with each other, and dirt will not remain on the front side.
Winding can be made of 1-3 harnesses. If the strip is over, we immediately increase the following. For her, it is necessary to smear the side side of the harness with glue and hold some time.
Then leave the product for the night to carefully glue the harnesses. Another day you need to separate the "snail" (workpiece) from plastic (surface) by a ruler or other object, it will stick.
I turn over the product to the outflow, the glue you need to drop directly to the center. Distribute evenly over the entire surface, leave to dry on 1 day.
For a good fixation of the product, it is necessary to glue the whole piece of the skin of the required size.
Further depends on the type of decoration. If it is a pendant, then you need to make a small loop between tight curls and glued on the wrong one. If we want to make a brooch - you need to attach a large pin.
Speecually looks at the combination of skin with fur.
We offer you spectacular products made by hand leather decorations in the photo.
Photo of leather jewelry
Today, the decorations made of genuine leather are one of the popular types of jewelry. Modern designers love to work with such a material. However, leather accessories can not only be purchased in the store, but also make it yourself. The advantage of self-simulation of beautiful leather jewelry is the convenience of work.
Brief content of the article:
Variations of combinations and features of the material
As can be seen in the photo of the jewelry of the skin, they can be complemented by a variety of materials of natural origin:
The elementary framework of the decoration can be decorated with beads, wooden buttons, metal elements, lace, perforation, stones.
Skin accessories are distinguished by their variety and versatility. Of this material, a variety of items are made - bracelets, pendants, brooches, earrings, straps. For any leather decoration, resistance to wear, ease of care, durability, aesthetics and styles are characteristic.
The skin is perfectly combined with any clothing. Accessories from her constitute a decent competition with gold and silver products.
For which styles is suitable leather jewelry
Leather decorations are allowed in different styles. If you are a romantic person, then take a look at the coulters and bracelets, decorated with beads, lace or beads.
Gothic fans will suit the coarse models, decorated with metal elements, animal fangs.
Those who prefer retro, it is better to stay on copies that combine openwork forged details and semi-precious stones.
The direction of the ethnic will emphasize the bright elements, large seams and coarse forms.
Making a bracelet
Consider the instructions how to make the decoration by the type of bracelet:
- Make a sketch of accessory on a piece of tight paper. It is necessary to draw, it is clearly sticking to the selected sizes, leaving the allowance for a gas. Cut the resulting result.
- Threaten a clasp. It can be a button with a cloth or leather shoelaces.
- Attach the pattern to the skin, put the sharpened piece of soap and cut. Coloring the material is better on the thick and wide base, since there is a risk of damage to the surface on which the sketch is located.
- In case the product consists of more than one element, combine them with each other with a leather cord.
- Install a clasp. If you stopped at an option with a button, you will need to purchase a special tool for the type of displacement.
- Decorate the resulting product. As a decor, stones, rhinestones, beads, chains, clashes can perform.
Such an element of leather is used in modeling sero and pendants, and they also decorate bracelets, rims and hair gums. In other words, curls can be used as a separate decoration and as an additional decor.
Prepare the following materials:
- thin skin soft dressing;
- PVA glue;
- A sheet of plastic or glass under the working basis.
Consider the step-by-step manufacture of similar leather ornaments:
- Take the skin, wash the glue the long edge and generate it by 5 mm. To make the material better clutch, press on top of a soft cloth and carefully sell the entire length.
- Cut the resulting flagery with scissors.
- Thus, make the required number of blanks.
- Wrap the burning snail and add glue into its center. Press the workpiece to the working surface and wait until the glue is grabbing.
- Follow the subsequent twisting on the plexiglas. It is necessary to make a strip of glue along the workpiece. During the turn, the glue will be captured by a cut - so the harnesses will be attached to each other, not leaving adhesive flots on the face of the product.
- You can wrap up both with one flagel and several. If necessary, the ending strip can be increasing.
- Leave curls for the night. In the morning separate it from the glass and turn over. Again the glue, distribute it all over the surface of the product and leave to dry on the day.
- In the wrong one, cover one-piece skin of the appropriate size.
Next should be acting depending on the type of accessory. If this is a suspension, then attach the loop if the brooch is the pin.
How to make a decoration made of leather with your own hands? The main thing here is a desire to create. Attach it a little fantasy and everything will work out.
Stock Foto Beautiful genuine leather jewelry
We also recommend viewing:
Please make repost