How to put a flash on iPhone when calling

How to put a flash on iPhone when calling
How to put a flash on iPhone when calling

Most likely, you have already seen this feature from someone from your acquaintances, and if not, I will briefly tell you what it is.

Its essence is that during a call or a notification flash on the back chamber iPhone begins to flash, thereby feeding the signal to the owner.

It is convenient for those who have problems with hearing, and for those who need to get rid of extra sounds, but it is important not to skip the call or a message. For example, if you are engaged in recording video or podcasts.

Turn on the flash (flashlight) when calling and notifications on the iPhone

For owners of iPhone on iOS 13

In order to enable this feature, it is enough to do a few simple steps.

1) Open " Settings " in English " Settings »

Settings
Settings

2) Find the item " Universal access " in English " Accessibility »

Universal access
Universal access

3) In the list that appears, find item "Audiovisual material " in English " Audio / Visual. »

Audiovisual material
Audiovisual material

4) in the section " Visual means " in English " Visual »Activate the checkbox" Flash Warnings " in English " LED Flash for Alerts " If you want this function to work only in silent mode, then activate the checkbox " In silent mode " in English " Flash on Silent. »

Flash Warnings
Flash Warnings

For iPhone owners on iOS 12

If you have an older phone model, you can also use this feature, just search for it in another place.

Need to enter the menu " Settings "->" Maintenance "->" Universal access "->" Hearing "It is here that the switch" Flash Warnings ».

If you have difficulty finding this feature, then use the built-in search for an iPhone. Enough swipes to the right and enter in the search field " Flash Warnings "Or in English" LED Flash for Alerts "And you immediately get into the desired settings section.

LED Flash for Alerts
LED Flash for Alerts

If you can't turn on this feature, please write about it in the comments below or see my video instruction.

What to do if the owner does not work

It happens that this function does not work immediately after the inclusion in order to correct this situation try:

  • Turn off if it has been turned on, night mode.
  • Turn off the phone for 15 seconds, and then turn on again.

If you did not get the first time, try to restart the phone again.

A source: http://firstiphone.ru/kak-postavit-vspishku-na-phone-pri-zvonke.html

How to enable / disable flash when calling on iPhone

Apple is known for its special attitude towards people with disabilities and trying to adapt their devices and their functions under the appropriate limitations. Oddly enough, but some of the possibilities of universal access intended for people with disabilities will not be superfluous and healthy owners of the iPhone and iPad. Many people like the visual notification of an incoming call or a message in the form of blinking when calling on the iPhone. How to enable flash on iPhone when calling, we will tell today.

By default, the iPhone included in the iPhone is accompanied by polyphonic melody and vibration created by the blades embedded in the smartphone with vibromotor. Users themselves can put their melody on the call and even set an individual vibration to contact in the iPhone. In most cases, this is enough, but you can stand out. Add one more type of alert about the incoming call can be literally in a minute several actions.

How to enable or disable flash when calling on iPhone:

  1. On the iPhone desktop, open settings;
  2. go to the main section; How to enable / disable flash when calling on the iPhone - Step 1.2
  3. click on the item universal access;
  4. scroll down and find a section of hearing; How to enable / disable flash when calling on iPhone - step 3.4
  5. Press the flash outbreak of warning;
  6. Translate the slider to ON or OFF. How to enable / disable flash when calling on the iPhone - step 5.6

It turns out that everything is simple, somewhat familiar movements in the right direction and at your disposal besides sound and vibro-indication when the call is also visual.

We draw your attention to the fact that flashing the flash when calling on the iPhone will occur only if the iPhone screen is blocked. If the smartphone is unlocked ("burns" the "home" screen), with an incoming call, the flashlight will not be pulsed, and why, if the appropriate notification is displayed on the screen itself. As you can see, even this minor function is thought out to the smallest detail, allowing you to save battery charge.

By the way, when you activate the "Flash Warning" function, a flash is turned on on the notifications on the iPhone, including incoming SMS messages that will also be denoted by flash signals.

The iPhone 8 flash is needed to notify the user about the incoming call. This is a convenient feature that turn on, the LED on the iPhone will begin to flash repeatedly, thereby making attention to the person's eye. You can feel the benefit from the outbreak with an incoming call at the moment when the smartphone is near, but configured to the silent mode of operation. The flickering LED is an excellent addition to standard phone vibrations. That's just not every user knows about all the possibilities of "apple". We will tell about how to turn on the outbreak on iPhone 8 and early models.

How to turn on the flash when calling for all iPhone models

This feature will also be useful for people experiencing hearing problems. The latest models of "apples" are equipped with a flashing LED and IOS system 11. Activate it in a new device will not be much labor. To do this, do the following:

  1. From the main Desktop device, open the "Settings"
  2. Select the section "Basic"
  3. Then go to the category "Universal Access"
  4. Scroll through the end of the tab that opens and stop at the hearing paragraph
  5. In earlier IOS versions, select the "Flash Warnings" option, in later versions - "Flash in silent mode"
  6. Move the slider to "Included"

Then you can make sure the correctness of your actions. To do this, it is necessary to wait for an incoming call or messages, and pay attention to the LED - he must lean three times.

If for some reason the function has become absolutely unnecessary, do all the actions described above again, in one exception, the slider must be put in the "Off" position.

How to enable flash when calling an iPhone for a quiet mode?

We learn that someone wants to communicate with us in the telephone at the expense of the sound alert iPhone or its vibration. However, vibration, and ringtone can be simultaneously included. Another thing is that in some situations we can not notice anything else. For example, in a nightclub, where to attract attention alongside the lying phone can only with the help of a flashing LED. How to enable flash on iPhone 8, which is used by the device camera and as a flashlight?

The method of activation of the function is as follows:

  1. Go to "Settings" iPhone
  2. Next to the section "Basic"
  3. Then click on the section "Universal Access"
  4. Dog at the very end to the hearing point
  5. In earlier IOS versions, select the "Flash Warnings" option, in later versions - "Flash in silent mode"
  6. Both sliders are transferred to "Inclusive"

As you can see, nothing complicated. Now every time, being in a silent mode of operation, the smartphone will serve the signal using LED flash.

Once again, we note in what situations such alert will significantly help:

  • During rest in places with increased noise
  • At the moment of hard work, when the outsiders interfere with and confuse, but I would not want to miss an incoming call
  • Some users use the LED flash signal as alarm

There are no difficulties with the activation of such an interesting ability of your "apple." To shut down, you need to do the same actions, but at the very end you move both sliders to the "off" position.

Video: How to enable flash when calling an iPhone?

In this video, step by step tells how to enable an outbreak on iPhone 8, X. After watching the video, all questions about the option of inclusion of the option will literally dissolve.

Why does the LED flash not working on an iPhone?

You did everything right, but the LED flash refuses to work? Make sure that the function check is carried out with a locked device. If you have an early model of "apple", try to restart the device and then check again, the LED flickers when calling or not. The phone must be addressed to the display down, otherwise you will not see anything. If you do an incoming call, and, and, as unfortunate no one calls, try to initiate notifications by setting the countdown of the timer.

Outcome

Now you know how to include an outbreak on iPhone 8. This useful ability of "apple" has recently undeservedly found itself in the shade. It is activated only by a few users, but for people with hearing problems is the priority option of the phone. It is for these goals in Apple and created the possibility of incorporating a person's alert about the arriving LED flash call.

Not everyone knows that starting with iOS 5, Apple developers have added an automatic flash response function for calls and notifications.

How to enable flash when calls and notifications on the iPhone

This feature can be useful not only for people with hearing problems, but also for those who would like to receive visual alerts instead of sound.

♥ on the topic: How to quickly compare "before and after" the processed photo and the original on the iPhone or iPad.

How to enable the flash with incoming calls and notifications on the iPhone

1. Open the application Settings and go to the section Universal access .

2. Select Audiovisualization .

How to enable the flash with incoming calls and notifications on the iPhone

3. Set the switch Flash Warnings in the Regulation Incl .

How to enable the flash with incoming calls and notifications on the iPhone

4. If necessary, activate the option In silent mode . When this item is activated, the LED flash will light only in the case when the iphone call call switch is in silent mode.

How to enable flash when calls and notifications on the iPhone

After activating the function Flash Warnings Whenever when receiving an incoming call or notification on the iPhone, the LED flash will flicker.

If the function does not work (it happens on old devices), restart the device.

And most importantly, do not forget to make sure that you put the phone screen down if you want to see this feature in action.

♥ on the topic: How to lower the iPhone screen to reach the finger of one hand to the top of the display.

How to enable flash with incoming calls and notifications on iPhone with iOS 5 - iOS 12

1. Go to Settings and select section Maintenance .

2. Scroll down and enter the menu Universal access .

IOS Settings - Universal Access

3. Select section Hearing And activate the switch Flash Warnings .

See also:

Standard iPhone alert methods are sound and vibration. As an additional, you can use the flicker of the flash LED. This is part of the possibilities of universal access, designed to ease the life of people with weakened vision, hearing and special needs. However, this feature will be useful to absolutely everyone.

To turn on the flash when calling the iPhone, you need to do the following.

How to enable flash when calling to iPhone: Open the standard "Settings" application How to enable the flash when calling on the iPhone: Go to "Universal Access" section

Open the Standard Settings application and go to the "Universal Access" section.

How to turn on the flash when calling on the iPhone: Open the "Audiovisualization" item How to turn on the flash when calling on the iPhone: Turn on the "Flash for warnings" and "in silent mode"

Scroll to the "Hearing" list, find and open the "Audiovisualization" item. Here you turn on the "Flash for warnings" and "in silent mode". If you do not want the smartphone to flash in silent mode, leave the second option inactive.

Now all calls, SMS, notifications from messengers and other alerts will be accompanied by the flicker of the flash LED. Keep in mind that this feature is available from iOS 10. On completely old iPhone it may not be.

Leave a Reply